Due to COVID-19 shipping times may vary

DVR Internet Setting

In order to connect our DVR to the Internet, you need to do some setting in menu. After setting, you can use APP or remote Cloud to view the DVR anywhere with Internet access. 

 

Step 1:

Assume you have connect DVR to router by network cable, then in DVR right-click mouse -> Main Menu -> Network

 

Step 2:

You can either choose DHCP or Static IP. If you choose Static IP, you may need to set IP Address, then leave Subnet Mask unchange, and Gateway is your router's IP address.

Note: Subnet in IP address (the third group digit in IP Address) must match the subnet of your router, usually it is 0, 1, or 3, please check with your router.

 

DVR Internet IP setting

 

Step 3:

Click OK after finish setup

4 comments

  • OgmYjCJdUVr

    ugkbxVsDeFSRvEw
  • zwoxJDfYFhuTGkl

    mEKARjDzWGyhT
  • OjKvkyTAUorDl

    XtJWsiVwHE
  • lOnzFwWrCy

    CEwMRrbLInyfuKz

Leave a comment

Name .
.
Message .